Answers are grounded in this paper and cite their sources.
Access to clean water is essential, yet small water-treatment units often give the user no information about the condition of the water being processed, and many depend on a mains supply. This paper presents the design of a solar-powered, IoT-enabled water purification prototype. The treatment path consists of three stages in sequence: a 5-micron sediment filter, a 10-inch activated carbon (CTO) block filter and an ultraviolet (UV-C) chamber, followed by a clean-water storage tank. An ESP32 microcontroller acquires readings from an EC-0568 pH meter, a turbidity sensor, a TDS sensor, a water-temperature sensor and a tank water-level sensor, and sends them over Wi-Fi to a Blynk dashboard for remote observation. A solar panel, charge controller and 12 V rechargeable battery with a buck converter supply the system, demonstrating renewable-energy use at prototype scale. The selected 3 W panel is a demonstration-scale source and may not sustain continuous pump and UV operation, so the actual operating time will be measured and recorded. The prototype has no RO stage and is not intended to remove dissolved salts, and sensor readings alone do not certify water as safe to drink. The work serves as an educational platform that combines basic water treatment, embedded sensing, renewable energy and IoT monitoring
No takes yet. Share an insight, caveat, or question.
Shreekanth et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: