Answers are grounded in this paper and cite their sources.
Direct ink writing three-dimensional printing provides a versatile platform for fabricating flexible multi-functional polymer materials, helping to balance the requirements of flexible strain sensors, including sensitivity, sensing range, and printability. In this work, a polydimethylsiloxane/carbon nanotube composite flexible strain sensor is developed using direct ink writing three-dimensional printing. The effects of carbon nanotube content (2–10 wt.%) on rheology and printability are investigated, and the mechanical and sensing performances of three infill patterns (grid, spiral, and honeycomb) are evaluated at three infill densities (30%, 40%, and 50%). Combining finite element simulations with experiments, 6 wt.% carbon nanotubes are identified as the optimal composition, balancing conductivity and printability. The grid pattern shows the best mechanical performance (maximum force of 17.2 N and displacement of 47.46 mm), while the spiral structure provides the most stable resistance signal. The grid structure is most sensitive to infill density: increasing infill density from 30% to 50% expands the strain range from 25% to 80% and increases the relative resistance change from 30% to 150%. The spiral and honeycomb structures exhibit a decreasing gauge factor with increasing infill density, whereas the grid structure reaches a peak gauge factor of 4.05 at 40% infill density. This study provides theoretical and experimental support for tailoring the structure–property relationship of direct ink writing printed flexible sensors.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: