Answers are grounded in this paper and cite their sources.
Proportional valve-controlled cylinders are the most widely used and most representative electro-hydraulic drives. This paper considers such a drive moving an inverted pendulum on a cart: one controller must swing the pendulum up, stabilize it, and track a cart reference, while the valve flow is nonlinear and the three tasks compete for the same valve. A single reinforcement learning (RL) policy based on deep deterministic policy gradient (DDPG) performs all three tasks. During training, a gated, state-dependent reward weighting shifts the emphasis from pendulum stabilization to cart tracking once the pendulum has been captured. In simulation, the controller is compared with a staged energy-based swing-up and linear quadratic regulator (LQR) baseline and with an RL controller trained with fixed reward weights. The proposed controller swings the pendulum up in 2.0 s instead of 4.7 s and completes a 0.5 m/s reference at which both comparison controllers reach the end stop. It also tracks more accurately than the fixed-weight controller, and without the gate the training does not balance the pendulum at all. The costs are a constant tracking offset of 10 mm, more valve motion, and a larger pendulum excursion than the baseline under an external force.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: