Answers are grounded in this paper and cite their sources.
The effect of different concentrations of plant ash alkali treatment with (5, 10, and 20 wt%) on the water contact angle, water absorption and thickness swelling of bamboo fiber (BR) reinforced polylactic acid (PLA) biocomposites sheets with fixed fiber content (20 wt%) as compared to pure PLA was studied in this work. BR were extracted from raw bamboo culms using a mechanical extraction process followed by pulverization techniques. BR underwent process through soaking in different concentration of plant ash solution for 8 h in 25 °C and were washed with distilled water to remove the alkali content from surface of fiber until become neutral followed with dried in oven on 60–70 °C. The elemental composition of the plant ash was identified by means of energy dispersive x-ray fluorescence (edxrf) to evaluate the elemental composition. The surface wettability of the composite sheet was measured by water contact angle analysis whereas water absorption and thickness swelling were investigated after immersion in distilled water for short periods of time to understand their moisture affinity. The findings showed good result by using fiber treated with plant ash alkali treatment composites compared to the untreated composites in terms of wettability through several tests which are contact angle, water absorption, density and thickness swelling tests. Meanwhile, APBRPLA-5 exhibited highest contact angle, APBRPLA-20 exhibited lowest density value (1.516 ± 0.029 g/cm 3 ). Moreover, there were moderate improvements in Izod impact strength and scanning electron microscopy (sem) images showing morphological characteristic of the modified BR and PLA matrix.
No takes yet. Share an insight, caveat, or question.
Hidzer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: