Answers are grounded in this paper and cite their sources.
The current study aims to investigate the mechanical, morphological and spectroscopic characteristics of epoxy-based hybrid composites reinforced by pineapple leaf fiber (PALF) and glass fiber (GF) with the addition of surface-modified montmorillonite nanoclay. Surface modification of pineapple leaf fibers was carried out via treatment with a 3 wt.% NaOH solution for 60 min. The symmetrically stacked G-P-G-P-G-P-G composites reinforced by 45 wt.% of GF and PALF were manufactured using the technique of hand lay-up and subsequent compression molding. The concentration of added nanoclay amounted to 1, 3, and 5 wt.%, and mechanical stirring combined with ultrasonication was used to ensure its even distribution in the epoxy matrix. The results suggest a substantial increase in tensile strength and Young’s modulus for the composite with 1 wt.% nanoclay (by about 31% and 18%, respectively). A performance deterioration tendency could be observed when increasing the concentration of nanoclay because of stress concentration resulting from the formation of agglomerations. Analysis of density showed improvement of packing and reduction in the void fraction in composites with lower nanoclay content. FESEM micrographs showed better bonding between phases, decreased pull-out of fibers and increased crack deflection rate. FTIR spectra verified polymer–nanoclay interaction, indicating agglomeration at higher nanoclay concentrations.
No takes yet. Share an insight, caveat, or question.
Thimmegowda et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: