Answers are grounded in this paper and cite their sources.
To design a sustainable low cost and scalable process to produce SOC, water-based slurries and suspensions are selected to sequentially spray the electrolytic layer (Electrolyte 8YSZ and Diffusion Barrier 10CGO) on top of a green electrode tape. The optimization of particle size distribution, aqueous based suspensions and spraying parameters leads to obtain homogeneous multilayer green tapes with thickness controlled by the number of passes. The optimized debinding and co-sintering processes allow converting green half-SOC into porosity controlled multi-layer ceramic using a single heat treatment up to 1500 °C to obtain dense electrolyte. The understanding of the reactivity mechanism between 8YSZ and 10CGO leads to inserting a 8YSZ-10CGO composite between individual layers. This composite ensures the homogeneous distribution of defects over a volume instead of at the interface preventing delamination. The analysis of charge transport properties indicates ohmic resistance similar for the three layers than for the single electrolyte. The combination of WPS and tape casting allows to sequentially deposit up to 4 green tapes converted using a single heat treatment in multi-layers ceramic with control of porosity and thickness demonstrating the Proof of Concept for eco-design of scalable process for the manufacturing of SOC at low cost.
No takes yet. Share an insight, caveat, or question.
Malié et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: