Answers are grounded in this paper and cite their sources.
Modern vehicles are more compact, and fuel cell vehicles (FCVs) are becoming more common. Both trends make radiator cooling harder. There is little space for a larger radiator or more air flow. FCVs produce water as a by-product, and this water could be used to cool the radiator. This study tests piezoelectric-actuated spray cooling on an automotive radiator. Two piezoelectric atomizers were placed in front of a flat-tube radiator with louvered fins. The radiator fan drew the water mist through the core. The coolant was water, in laminar flow (Reynolds number of about 195 to 270). The heating power was 2000, 2500 or 3500 W, which gave coolant inlet temperatures of 41.5 to 61.1 °C. The air velocity was 1.7, 2.0 or 2.3 m/s. The spray flow rate was 0, 5.56 × 10−8 or 1.28 × 10−7 m3/s (3.3 to 7.7 mL/min). Performance was measured by an effective coolant-side Nusselt number. Its uncertainty was 13% to 28%. At the higher spray flow rate, the effective Nusselt number rose by 31.4% to 49.4% over the range of heating power. The enhancement did not rise steadily with heating power. The effect of the spray depended on air velocity. The enhancement was 6.2% at 1.7 m/s and 49.4% at 2.3 m/s. At 1.7 m/s, it was within the measurement uncertainty. From 1.7 to 2.3 m/s, the Nusselt number rose by a factor of 1.54 with the higher spray flow rate and 1.09 without spray. These results suggest that a low-flow piezoelectric spray can improve radiator heat transfer, mainly at higher air velocity. Further tests at engine coolant temperatures and higher coolant flow rates are needed.
No takes yet. Share an insight, caveat, or question.
Kiat et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: