Answers are grounded in this paper and cite their sources.
Sensitivity remains a major limitation of nano-liquid chromatography (nano-LC), where reduced injection volumes and small spectrophotometric detection cells constrain analytical performance relative to conventional HPLC. This work systematically investigated sample on-column focusing strategies to control overloading during large-volume injections in nano-LC without compromising chromatographic resolution and efficiency. Using a model mixture of alkylbenzenes separated on a 100 µm i.d. capillary column packed with a C18 stationary phase in a lab-made nano-LC system, three complementary approaches were evaluated: (i) tuning the sample diluent composition, including aqueous content and the use of conventional and green organic co-solvents (isoamylacetate, 2-methyltetrahydrofuran, and dimethyl carbonate); (ii) injection-sequence strategies based on pre- and post-injection solvent plugs; and (iii) localized low-temperature focusing achieved with an instant cold spray applied at the column inlet immediately before sample injection. Optimizing diluent composition alone enabled a ∼40/60-fold increase in injection volume (up to 600-1000 nL) without loss of efficiency. Adding a post-injection water plug extended this to ∼120/150-fold (2000-2500 nL), improving chromatographic efficiency by up to 30%. When high diluent eluent strength precluded solvent-based focusing, a brief cold-spray application at the column inlet (down to ∼4°C) fully restored resolution, independent of the organic solvent used. These results demonstrate that combining diluent tuning, injection-sequence control, and low-temperature focusing can extend nano-LC injection volumes by nearly two orders of magnitude beyond the theoretical admissible injection volume while preserving separation performance, offering simple, low-cost strategies to improve analytical sensitivity.
No takes yet. Share an insight, caveat, or question.
D'Orazio et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: