Answers are grounded in this paper and cite their sources.
In this study, the effects of extrusion process parameters (screw speed, residence time, and fiber feeding protocol) on the morphological, rheological, and mechanical properties of synthetic and bio-based polymeric composites-namely polyamide 6 (PA6)/glass fiber (GF) and polyamide 11 (PA11)/hemp fiber (HF) composites-were comprehensively investigated. For this purpose, scanning electron microscopy (SEM), rheological analyses, tensile, impact, and flexural tests, and average fiber length measurements were performed. The results revealed that late fiber feeding preserved longer fibers in both systems, whereas the effect of screw speed on fiber length depended on the residence time, feeding protocol, and fiber loading, with reductions of up to 14.6% for glass fibers and 28.7% for hemp fibers when the screw speed was increased from 100 to 150 rpm. Rheological analyses showed that the feeding protocol in which the fibers were added to the extruder barrel at the final stage of processing yielded higher complex viscosity, storage modulus, and loss modulus values. On the other hand, a general decrease in the impact strength of the composites was observed with increasing screw speed and residence time. These findings demonstrate that extrusion process parameters play a decisive role in fiber dimensions, matrix-fiber interactions, and the final performance of the composites and highlight the importance of optimizing processing conditions in the production of synthetic and bio-based fiber-reinforced polymeric composites.
No takes yet. Share an insight, caveat, or question.
YILDIRIM et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: