Answers are grounded in this paper and cite their sources.
Buried oil and gas pipelines crossing landslide-prone terrain are vulnerable to large ground deformation, yet their progressive pipe–soil interaction and failure behavior remain insufficiently characterized experimentally. This study investigates the mechanical response and failure of a shallow-buried steel pipeline subjected to lateral landslide loading using large-scale physical model tests. The experiment comprised sequential slope inclination adjustments in 5° increments, followed by displacement-controlled loading at a slope inclination of 30°, while pipeline axial strain, surrounding soil pressure, and deflection were monitored. The results show that increasing slope inclination intensified strain concentration near the pipeline midspan. During displacement loading, the tensile strain peaked at approximately 8100 με at a landslide displacement of 50 mm, whereas the compressive strain reached approximately −12,400 με at 58 mm. Frontal soil pressure peaked earlier, at approximately 44–45 kPa near 46 mm displacement, indicating that peak soil resistance preceded pipeline instability. Local buckling subsequently developed near the pipeline midspan, accompanied by approximately symmetric beam-like global bending. Comparisons with a PSI soil-spring model and a three-dimensional solid-contact finite-element model showed reasonable agreement during the pre-buckling response but substantial underestimation of strain after local buckling, with predicted values less than half the measured magnitude. These findings clarify the transition from soil-resistance-controlled deformation to localized structural instability and provide experimental evidence for evaluating buried pipelines subjected to landslide-induced ground deformation.
No takes yet. Share an insight, caveat, or question.
Cui et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: