Answers are grounded in this paper and cite their sources.
This research was conducted to investigate the effects of α-Fe 2 O 3 nanoparticles as a reinforcing agent on the mechanical and thermal properties of polyurea (PUA) at different weight percentages (0.5%, 1%, 2%, 3%, 4%, 5%, 6%, 7%, 8%, 9%, and 10%) to obtain a composite material. Mechanical tests (hardness, tensile strength, compressive strength, and flexural strength) and thermal tests (thermal conductivity and thermogravimetric analysis) were performed on the samples. Structural properties were also investigated using Fourier transform infrared spectroscopy (FTIR) and morphological properties were examined using scanning electron microscopy (SEM). The tests showed that reinforcing the polyurea with α-Fe 2 O 3 improved the mechanical properties (hardness, modulus of elasticity, and flexural strength), while compressive strength decreased. The best results were obtained at a weight percentage of 1%. Thermal conductivity increased with the addition of the reinforcing agent at room temperature. By 12%, and it also increased with heat treatment at temperatures of (7-80) ⁰C, while thermal analysis showed slight changes in the curves, which led to an improvement in the resistance of the base material to thermal decomposition at a low content of nanoparticles, while infrared spectroscopy analysis confirmed the presence of physical, not chemical, interactions between the nanoparticles and the polymer, and SEM examinations showed air bubbles and slight clumping in the samples.
No takes yet. Share an insight, caveat, or question.
Sulyman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: