Answers are grounded in this paper and cite their sources.
Direct LiT electrolysis, a tritium extraction process patented at Savannah River National Laboratory (SRNL), utilizes solid-state electrolytes to extract tritium directly from molten Li or PbLi without the need for an extraction solvent. Such a strategy has the potential to reduce the footprint and unit operations of tritium extraction systems in future deuterium-tritium (D-T) fusion power plants. However, optimization of electrolyte properties and an understanding of electrolyte degradation mechanisms are needed to further improve the technological readiness of this process. Here, dense (~97%), single-phase cubic Ta- and Nb-doped lithium lanthanum zirconate (LLZO) electrolytes were synthesized by spark plasma sintering (SPS). Static corrosion testing of Ta-doped LLZO immersed in molten Li at 350°C for 100 h revealed no change in the high Li-ion conductivity cubic garnet LLZO crystal structure. Utilizing a custom impedance testing apparatus, Li-ion conductivities of 6.40 × 10−4 and 2.85 × 10−1 S/cm were measured at room temperature and ~475°C, respectively. Upon exposure to air, an approximately 70% decrease in Li-ion conductivity was observed over ~10.5 h, presumably due to the formation of carbonate species on the LLZO surface. Electrolysis of unpurified Li was conducted with both SPS Ta- and Nb-doped LLZO electrolytes. In both cases, the application of a potential led to large (>500 mA) currents with a clear, concurrent rise in H2 evolution, thereby demonstrating the viability of cubic garnet electrolytes for direct LiT electrolysis. Posttest analysis of the electrolytes showed evidence of dendrite formation growth, and steps to mitigate such phenomena must be considered to improve overall electrolyte durability and lifetime.
No takes yet. Share an insight, caveat, or question.
Dandeneau et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: