Answers are grounded in this paper and cite their sources.
In a vanadium redox flow battery the liquid is the chemistry: vanadium in sulfuric acid flows from two tanks through the cell and the energy is stored in the tanks, so the liquid electrolyte cannot be replaced. The weak element is the electrode, which is graphite felt: it wets poorly, has few active sites and a small specific surface. Etching with acid, alkali or CO2 raises the surface 8-10 times, yet energy efficiency still falls as current density rises, from about 85% at low current to about 70% at high current, so more power means more cells. An installed vanadium system costs about 450 USD/kWh against about 300 USD/kWh for four-hour lithium-ion, and 30-50% of that cost is the electrolyte. We describe ARBOK-VAGRA, a concept in which the felt electrodes are replaced by electrodes of thermally expanded graphite ARBOK (TEGA), a graphene-like carbon material with a specific surface of 2,400 m2/g, while the electrolyte, tanks and membrane remain unchanged. The target is to hold efficiency at high current at the low-current level, about 85% instead of 70%. A scenario estimate gives about 220 mln USD per GWh over 20 years of service. The principle of liquid in tanks and graphene in the electrode is already used in the ARBOK BINARY BATTERY. No VAGRA cell has been measured.
No takes yet. Share an insight, caveat, or question.
Vischmidt et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: