Answers are grounded in this paper and cite their sources.
The thermal stability of wood adhesives is a key factor governing the reliability of bonded load-bearing timber elements under fire exposure. In this study, a novel test method enabling a direct, failure-based assessment of the high-temperature performance of adhesive bondlines was developed and evaluated against a reference method. Bonded specimens are subjected to a constant tensile stress perpendicular to the bondline by means of springs and heated in a controlled manner until failure occurs. The corresponding failure temperature is used as a measure of bondline thermal stability. Two structural polyurethane adhesives used for load-bearing timber applications were investigated. Their differing high-temperature performance was confirmed by thermoanalytical investigations, which revealed distinct thermal transitions below 300 °C. The spring-loaded transverse-tensile test was evaluated against compression–shear tests as a reference method. Both approaches consistently identified differences in the thermal stability of the investigated adhesives, with stability limits of approximately 200 °C and 230 °C indicated by the reference method. The failure-based approach yielded slightly higher temperatures. The proposed method represents a valuable complement to existing test procedures by providing insight into the temperature-dependent loss of load-bearing capacity of adhesive bondlines under combined thermal and mechanical loading.
No takes yet. Share an insight, caveat, or question.
Vay et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: