Answers are grounded in this paper and cite their sources.
Per-station energy metering in Industrial IoT (IIoT) environments makes it possible to instrument flexible production lines, yet turning such measurements into design decisions remains an open problem. This paper presents a learning-augmented energy digital twin of a real flexible manufacturing line (FML) with seven workstations, industrial robots and radio-frequency identification (RFID) traceability producing three product types. The twin combines per-station time and power surrogate models, learned from metered data at four to five operating points through regression with model selection, with a discrete-event simulator derived from the timed Petri-net model of the zero-buffer, re-entrant line. A multi-layered Grey Wolf Optimizer (AGWO), whose second layer calibrates the compute budget, reaches the optimum in all 30 independent runs within a few milliseconds, and its search core is benchmarked against particle swarm optimization (PSO) and a genetic algorithm (GA) on 23 test functions. The computed set-points were implemented on the physical line. The twin quantifies the classical improvement levers: conveyor-speed tuning yields at most 2.7% energy-per-part savings, job-mix sequencing of 0.6%, and buffer installation of 0%, because the bottleneck station is utilized 99.2% of the time. In contrast, a model-based what-if analysis projects that reducing its cycle time by 25–50% would lower the energy per part by 24–48%. The results show that an inexpensive, measurement-grounded twin can exclude unprofitable design directions and target investment where it matters.
No takes yet. Share an insight, caveat, or question.
Paun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: