Answers are grounded in this paper and cite their sources.
Chlor-alkali electrolysis is one of the most energy-intensive industrial processes, and the development of cathode materials that balance high activity with reduced noble metal utilization remains a critical challenge. This work reports the evaluation of low-platinum on carbon cloth (Pt/CC) cathodes in membrane chlor-alkali electrolysis. The Pt loading levels ranged from 0.025 to 0.2 mg Pt cm–2 and were deposited via air-gun spray and electrospray. XRD analysis confirmed fcc Pt crystallites in both air-gun- and electrospray-deposited electrodes with no oxide phases, demonstrating that the deposition technique does not affect the crystallographic structure of the catalyst. Full-cell linear sweep voltammetry and galvanostatic electrolysis experiments revealed a decrease in specific energy consumption for NaOH production with increasing Pt loading. Balancing performance and platinum utilization, a loading of 0.05 mg Pt cm–2 emerged as optimal, which, at 100 mA cm–2, achieved a specific energy consumption of 2.94 and 2.83 kWh kg–1 NaOH at 25 and 50 °C, respectively. At this optimal loading level, the electrode demonstrated high durability over 80 h of operation at 100 mA cm–2 and 50 °C. The technology was further validated in a four-cell stack comprising 25 cm2 electrodes connected in parallel, yielding enhanced performance and operational stability. These results demonstrate that air-gun-spray-deposited Pt/CC cathodes at 0.05 mg Pt cm–2 loading offer a compelling combination of competitive energy efficiency and minimal noble metal utilization, highlighting the potential for an ultralow-Pt-based cathode platform for next-generation energy-efficient chlor-alkali production.
No takes yet. Share an insight, caveat, or question.
Nopuo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: