Answers are grounded in this paper and cite their sources.
Accurate prediction of rock fragmentation is important for optimizing blast design and downstream mining operations. This study compares empirical fragmentation models with a site-specific data-driven approach for predicting mean fragment size ( X 50 ) at the Elkem Tana quartzite mine in Norway. Ten production blasts were analyzed using three-dimensional drone photogrammetry. Four empirical approaches were evaluated: KuzRam, Kuznetsov–Cunningham–Ouchterlony (KCO), Chung and Katsabanis (C&K), and Modified C&K. The rock factor ( A ) was estimated using the Lilly Blastability Index and calibrated using measured fragmentation data. An ElasticNet model was developed using blast geometry, powder factor, characteristic in-situ block size, and an angular-difference (AD) parameter describing the angular contrast between the two dominant discontinuity sets relative to the bench face. Uncalibrated empirical models produced mean absolute percentage error (MAPE) values of 70.9% for KuzRam/KCO and 167% for C&K/Modified C&K. Calibration improved performance, but the best calibrated empirical model resulted in an Root Mean Square Error (RMSE) of 27.1 mm. ElasticNet achieved a leave-one-out cross-validation R 2 of 0.934, RMSE of 7.93 mm, and MAPE of 2.7%. Bench height-to-burden ratio produced the largest variation in predicted X 50 , followed by AD, demonstrating the potential of combining site-specific blast parameters and rock-mass structural descriptors for improved fragmentation prediction.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: