Answers are grounded in this paper and cite their sources.
This research investigated the effect of sugarcane bagasse ash (SCBA), an agricultural waste, on the alkaline activation of uncalcined clay (UC)-based pastes. The solid precursor consisted of UC partially replaced with SCBA at levels ranging from 5 to 30 wt.%. The solid-to-liquid mass ratio was maintained at 2.0, and the alkaline activator consisted of sodium hydroxide (NaOH, 10 M) and sodium silicate (Na2SiO3) at a mass ratio of 3:1. The mechanical, thermal, mineralogical, chemical, and microstructural properties of the resulting pastes were evaluated. The results showed that the incorporation of SCBA did not produce a monotonic response in the properties investigated. The highest compressive strength, 4.333 MPa, was obtained at 30 wt.% SCBA, whereas the lowest thermal conductivity, 0.4765 W m−1 K−1, was measured at 20 wt.% SCBA. SCBA. XRD, FTIR, and SEM revealed changes in the crystalline phase assemblage, chemical environment, and microstructural morphology with increasing SCBA content. The findings demonstrate the potential of this waste-derived alkali-activated system for construction applications where moderate mechanical performance and reduced thermal conductivity are required.
No takes yet. Share an insight, caveat, or question.
Aguilar-Joo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: