Answers are grounded in this paper and cite their sources.
River-sand depletion and the accumulation of quarrying by-products have increased interest in alternative fine aggregates for sustainable concrete production. This study investigates the influence of granite-derived quarry dust (QD) on the mechanical performance, microstructural characteristics and carbon efficiency of concrete. Six concrete mixtures were prepared by replacing natural river sand with QD at 0, 20, 40, 60, 80 and 100% by mass, maintaining a constant water-to-cement ratio of 0.45. Workability, density, compressive strength and splitting tensile strength were evaluated at curing ages of 3–92 days, complemented by scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX), statistical analysis and a screening cradle-to-gate life-cycle assessment. Increasing QD content reduced slump by up to 46%, while variations in fresh and hardened densities remained below 0.15% relative to the control. At 28 days, 40% QD replacement produced the highest compressive and splitting tensile strengths, exceeding the control by 12.1% and 7.8%, respectively. Analysis of variance confirmed significant effects of QD content on both mechanical properties ( p < 0.001), although differences between 40% and 60% replacement were not statistically significant. Qualitative SEM–EDX observations were consistent with improved matrix continuity and interfacial characteristics at intermediate replacement levels, whereas higher QD contents were associated with reduced workability and less favourable microstructural features. Cradle-to-gate global warming potential varied by less than 0.5% across the mixtures under both allocation scenarios; however, 40% QD replacement reduced strength-normalized global warming potential by 10.7% and avoided 246.8 kg/m³ of natural river sand. These findings identify 40–60% QD as a favourable replacement range for the investigated materials, with 40% providing the best balance of mechanical performance, workability and strength-normalized carbon efficiency.
No takes yet. Share an insight, caveat, or question.
Imoh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: