Answers are grounded in this paper and cite their sources.
A bio‐based waterborne styrene–acrylate/epoxidized soybean oil (SA/ESO) latex was developed by directly incorporating unmodified ESO into a glycidyl methacrylate (GMA)‐functionalized acrylic matrix and curing with isophorone diamine (IPDA) to construct an interconnected crosslinked network. ESO acted as both a flexible bio‐based component for film formation and a reactive epoxy‐containing phase, while GMA provided covalently anchored epoxy groups in the acrylic backbone to regulate epoxy–amine reactions and improve compatibility between ESO‐rich domains and the SA matrix. The effects of GMA content and amine/epoxy ratio on latex stability, curing behavior, network formation, and coating performance were systematically studied. Rheology and particle‐size results showed that appropriate GMA incorporation suppressed uncontrolled ESO–IPDA aggregation and improved colloidal uniformity, with ESO/GMA2.5/IPDA1 showing the most stable particle structure. FTIR and DSC confirmed epoxy consumption and hydroxyl‐containing crosslinked structure formation during curing. The optimized ESO/GMA2.5/IPDA1 film exhibited enhanced solvent and water resistance, hardness (5H), water contact angle (81°), crosslinking degree (95%), low swelling (30%), and balanced modulus and toughness.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: