Answers are grounded in this paper and cite their sources.
The widespread use of non-degradable plastics has prompted the development of polyvinyl alcohol (PVA)-based bioplastics reinforced with nanocrystalline cellulose (NCC). This study synthesized and characterized PVA-NCC biocomposites using NCC isolated from sugar palm fiber ( Arenga pinnata ) through alkalization, bleaching, and acid hydrolysis, with NCC contents of 0–5 wt% (BPN0–BPN5). FTIR showed no new absorption bands, consistent with hydrogen-bonding interactions between NCC and PVA. The crystallinity index (CrI) increased from 10.38 ± 0.78% (raw fiber) to 43.08 ± 0.89% (NCC), and from 20.20 ± 1.06% to 34.08 ± 0.89% in the films with NCC addition. TEM showed NCC average diameters of 6.53 ± 0.29 nm. Opacity (400–800 nm) increased from 17.67 ± 1.53–194.33 ± 4.51 au.nm; UV-barrier and food-packaging performance were not tested. No single formulation was best in all properties: tensile strength plateaued at 2–3 wt% NCC (BPN3 highest, 4.25 ± 0.07 MPa, not significantly different from BPN2 and BPN5), elongation at break was highest in BPN2 (47.00 ± 1.73%), and Young’s modulus was highest in BPN5 (186.33 ± 12.34 MPa), while BPN1–BPN3 were lower than neat PVA. DMA showed higher storage modulus and lower tan δ in NCC-containing films; BPN2 had the highest storage modulus at low temperature, and BPN3 retained it best at high temperature. Overall, sugar palm NCC is a promising renewable filler for tuning PVA film properties, with 2–3 wt% giving the best balance of strength and extensibility; packaging use remains a potential application requiring further testing.
No takes yet. Share an insight, caveat, or question.
Ritonga et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: