Answers are grounded in this paper and cite their sources.
To enhance the vibration mitigation efficiency and mass effectiveness of conventional tuned mass dampers (TMDs), this study investigates two novel passive vibration absorbers: the Disk-type tuned mass damper (Disk-TMD) and the Rim-type tuned mass damper (Rim-TMD). Unlike a classical TMD, these devices employ rolling masses with disk-shaped and rim-shaped geometries, respectively, which significantly increase the absorber's kinetic energy without increasing its physical mass. Analytical models are developed for a single-degree-of-freedom (SDOF) structure equipped with each TMD configuration under harmonic point force excitation. By exploiting the equivalence between rolling kinetic energy and effective inertial mass, explicit optimal tuning formulas for the Disk-TMD and Rim-TMD are derived based on established tuning formulations for classical TMDs. The optimal parameters are determined using both analytical formulas and a numerical optimization algorithm, and close agreement between the two approaches is demonstrated. Comparative results show that, for the same mass ratio, both Disk-TMD and Rim-TMD consistently achieve lower peak dynamic magnification factors than a conventional TMD, with the Rim-TMD providing the best overall performance. For a given target vibration reduction level, the Disk-TMD and Rim-TMD can reduce the required absorber mass by approximately 33.3% and 50%, respectively, compared to a classical TMD. Moreover, the proposed configurations significantly reduce the stroke of the damper mass. These findings highlight the superior vibration control performance, mass efficiency, and practical applicability of Disk- and Rim-type TMDs for civil structures.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: