Answers are grounded in this paper and cite their sources.
This study addresses the critical challenge of efficient hydrogen (H2) and carbon dioxide (CO2) storage by investigating 16 commercially available nanoporous carbons with Brunauer-Emmett-Teller (BET) surface areas ranging from ≈ 560 m2/g to 3380 m2/g. The purpose of the study was to correlate textural properties, particularly micropore surface area and volume, with low-pressure (0-1 bar) gas uptake performance, thereby providing a comparative basis for screening adsorbents relevant to H2 storage and CO2 capture. Structural investigations were performed via X-ray diffraction and Raman spectroscopy. The textural properties of nanoporous carbons derived from various precursor materials (coconut, organic, and petroleum) were systematically characterized using N2 adsorption at 77 K and CO2 adsorption at 273 K. Additionally, H2 adsorption studies at 77 K and up to 1 bar were performed. The results revealed that gravimetric H2 uptake at 77 K and 1 bar strongly correlates with micropore surface area and micropore volume, with petroleum-derived super-activated carbons achieving uptakes up to 2.74 wt.%. However, coconut-derived materials exhibited higher calculated volumetric H2 uptake under an idealized material-volume normalization, reaching up to 18.12 g/L. In contrast, CO2 uptake at 273 K demonstrated a weaker dependence on these textural parameters, suggesting that additional factors such as the sub-critical behavior of CO2 at this temperature are influential. A techno-economic analysis further indicated that, despite their moderate adsorption capacities, coconut-derived nanoporous carbons offer a favorable combination of low-pressure adsorption performance and quoted adsorbent cost compared to their petroleum-derived and organic precursor-derived counterparts.
No takes yet. Share an insight, caveat, or question.
Zeiler et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: