Answers are grounded in this paper and cite their sources.
Segmented ionic polymer-metal composite (IPMC) actuators are attractive for compact soft robotic systems because they can produce large bending deformations under low driving voltages while maintaining compliant interaction with their surroundings. However, deploying segmented IPMC actuators in autonomous or sensor-limited settings requires knowledge of the actuator shape without relying on external displacement sensors. In this work, a dielectric elastomer (DE) sensing layer is integrated with a segmented IPMC actuator to realize capacitance-based self-sensing of a displacement-derived twisting angle. The segmented IPMC supplies low-voltage bending and twisting actuation, whereas the bonded DE layer acts as a stretchable capacitor whose capacitance varies with actuator deformation. A control-oriented modeling framework describes the IPMC segment response, the DE capacitance variation, and the calibrated relationship between the measured capacitance and the displacement-derived twisting angle. During calibration, laser displacement sensors provide reference measurements. In the closed-loop experiment, the PID controller receives the DE-capacitance-derived angle estimate as its feedback signal; the laser-derived angle is recorded simultaneously only as an independent reference and is not used by the controller. The experimental results demonstrate the feasibility of capacitance-based self-sensing feedback control along the tested twisting-dominant motion path.
No takes yet. Share an insight, caveat, or question.
Koc et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: