Answers are grounded in this paper and cite their sources.
The urgent need for effective carbon dioxide (CO2) mitigation strategies necessitates the development of robust, high-capacity sorbents for CO2 separation processes that operate from sub-atmospheric to elevated pressures. This study systematically evaluates the structural, thermodynamic, and gravimetric performance of a commercial amine-functionalized macroporous polymer resin (LEWATIT VP OC 1065). The sorbent demonstrated a maximum CO2 uptake of 2.76 mmol/g at 20 °C and 1 bar, scaling to an exceptional capacity of 4.65 mmol/g at 30 bar. A dedicated nitrogen N2 adsorption and desorption experiment at 20 °C yielded a CO2 to N2 selectivity between approximately 74 and 97 across the 100 to 1000 mbar window, confirming that the balance N2 of air or flue gas feeds does not compete measurably for capacity. Thermodynamic assessments indicate that chemisorption dictates uptake at low partial pressures, while physisorption mechanisms contribute at elevated pressures. A dual-site Langmuir model with shared site capacities of 1.87 and 1.70 mmol/g describes the three absolute isotherms with R2 ≥ 0.997. The measured isotherms give working capacities of 0.45 to 0.85 mmol/g for a 1000 to 100 mbar pressure swing and 2.1 mmol/g for a 30 to 1 bar swing at 20 °C. Furthermore, cyclical adsorption–desorption evaluations confirmed sustained capture efficiency and structural resilience over 20 continuous cycles utilizing thermal-vacuum regeneration. All measurements were performed with pure CO2 under dry conditions. The results therefore constitute a sorbent-level equilibrium and kinetic assessment. These findings support this aminated resin as a versatile and stable candidate for a wide operational spectrum of CO2 separation applications and provide the thermodynamic and kinetic dataset required for isotherm model fitting and process simulation.
No takes yet. Share an insight, caveat, or question.
Al-Bodour et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: