Answers are grounded in this paper and cite their sources.
Pseudo-stem fiber from the banana plant (Musa sp.), a biodegradable material derived from agriculture waste, is a very promising source of natural fibers. In this research, the prop666erties and advanced applications of fibrils obtained from the banana stem have been investigated. Bioplastic films based on corn starch were prepared by using the solution casting method where glycerol was used as a plasticizer in different quantities of 1 ml, 2 ml, 3 ml, and 4 ml; the corresponding samples are CSG3, CSG4, and CSG5. The films were tested for tensile strength, elongation at break, density, moisture content, film thickness, and water, weak acid, weak base, strong acid, and strong base solubility. The result identified that the film made up of 1 ml of glycerol (code sample CSG3) had the highest tensile strength of 15.5 kg/cm2, and that elongation at break ranged between 8.1% (CSG5) to 16.8% (CSG3) as the amount of glycerol used reduced. Density varied in a non-linear manner; the lowest was 0.131 g/cm3 at a medium level of glycerol use, before rising to 0.1402 g/cm3. The moisture content of the films was between 30.4% and 32.1%. For solubility, in both acid and base all films were found to be completely soluble (100%) and stable in water. This demonstrated the feasibility of using corn starch-glycerol films as sustainable packaging materials.
No takes yet. Share an insight, caveat, or question.
Shukla et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: