Answers are grounded in this paper and cite their sources.
To develop integrated insulating and adhesive films for two‐layer flexible copper‐clad laminates (2L‐FCCLs), two series of polyimide (PI) films containing thioether (PI‐S) or oxyether (PI‐O) linkages are prepared via a conventional two‐step method and subsequently laminated with copper foils to fabricate double‐sided 2L‐FCCLs. Their chemical and physical structures, heat resistance, thermal stability, dimensional stability, dielectric properties, peel strength, and solder float resistance are systematically compared. Both PI series films exhibit satisfactory overall performance, meeting the basic requirements of typical thermoplastic polyimide (TPI) films. Compared with the PI‐O series, the PI‐S series films show slightly lower heat resistance, thermal stability, dimensional stability, mechanical strength and toughness, and optical transparency, but higher char yield, elastic modulus, and peel strength, along with lower relative permittivity ( D k ) and dissipation factor ( D f ). Notably, PI‐S6 exhibites a D k of 2.75 and a D f of 0.0077 at 10 GHz, and the corresponding 2L‐FCCL shows the highest 90° peel strength ( 90PS ) of 1.32 N mm −1 while passing the solder float test at 288°C. These findings demonstrate that thioether‐containing PI films constitute a promising adhesive‐free approach for high‐frequency flexible printed circuit (FPC) applications, enabling simultaneous reductions in D k and D f and enhanced adhesion without compromising overall material performance.
No takes yet. Share an insight, caveat, or question.
Ye et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: