Answers are grounded in this paper and cite their sources.
This paper presents an experimental study on roller-compacted concrete pavement (RCCP) containing nano-silica (NS) and an air-entraining agent (AEA). Eight mixtures were prepared: one control mix, three mixes with NS only, three mixes with AEA only, and one combined mix with 4.5% NS and 0.7% AEA. The NS mixtures needed more mixing water, and their water-to-binder ratio was 0.33–0.36, compared with 0.29 for the other mixtures. Workability was evaluated by Vebe time, and compressive strength was measured at 7, 14, and 28 days. Freeze–thaw resistance was tested only for the control mix and the combined mix by ASTM C666 Procedure A. The 28-day compressive strength was 40.2 MPa for the control mix and 42.9 MPa for the mix with 4.5% NS, but this difference was not statistically significant. The mix with 6.0% NS had a strength of 33.3 MPa. In the AEA series, the mix with 0.7% AEA showed the closest strength to the control mix. The combined mix gave the highest mean 28-day compressive strength, 44.7 MPa. However, the control mix completed 300 freeze–thaw cycles with a durability factor of 92, while the relative dynamic modulus of the combined mix fell below 60% at 117 cycles, with a durability factor of 19. Fresh air content, hardened air-void parameters, and pore-scale characteristics were not measured, and the combined mix had a higher water-to-binder ratio than the control. Therefore, the mechanism responsible for the observed strength-durability mismatch cannot be confirmed. The freeze-thaw discussion is limited to hypothesis-based interpretation of the measured performance outcomes.
No takes yet. Share an insight, caveat, or question.
Mazaherizaveh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: