Answers are grounded in this paper and cite their sources.
At present, car wash wastewaters (CWWs) constitute a major environmental hazard and represent one of the most critical industrial waste streams. Ultrafiltration (UF) is widely recognized as an effective method for addressing the environmental challenges associated with CWWs. Among commercially available UF membranes utilized for CWWs treatment, polyvinylidene fluoride (PVDF) membranes are prominent. However, a comprehensive literature review reveals that previous studies have predominantly focused on PVDF membranes with a molecular weight cut-off (MWCO) of 100 kDa. The originality of this study lies in the evaluation of the long-term performance and fouling behaviour of commercial PVDF membranes with an MWCO of 30 kDa during CWW ultrafiltration. The results demonstrated that the membranes were highly effective in producing a clarified permeate with a turbidity below 1 NTU. Moreover, partial removal of chemical oxygen demand (COD) and surfactants present in CWWs was achieved. Fouling analysis based on membrane autopsy (SEM and FTIR) suggested that membrane fouling evolved from an initial pore-blocking stage to the formation of an organic-rich cake layer during prolonged operation. In contrast to previously investigated 100 kDa PVDF membranes, the PV30 membrane exhibited post-cleaning permeability enhancement, temporary retention deterioration and subsequent performance stabilization, which was attributed to the gradual blockage of surface macropores during filtration.
No takes yet. Share an insight, caveat, or question.
Tomczak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: