Answers are grounded in this paper and cite their sources.
Reducing the cement content of two-component tunnel boring machine (TBM) backfill grouts is constrained by the need for rapid gelation and early strength. This study evaluated pumice as a 10–30 wt.% cement replacement and pumice-based nanosilica (PBNS; 154 m2/g) synthesized from the same pumice; a 2 × 2 factorial design (20 wt.% pumice,1 wt.% PBNS) quantified their interaction. Fresh properties and the 1-, 7- and 28-day uniaxial compressive strength (UCS) were measured, and selected grouts were examined by XRD, FTIR and SEM–EDS. All grouts gelled within 8.1–10.6 s, and pumice reduced bleeding. Pumice caused no detectable 1-day strength loss and, at 20 wt.%, no detectable 28-day loss, but reduced the 7-day strength by 43–49%; PBNS increased the 1-day UCS of the cement-only grout by 40% (1.02 to 1.43 MPa). The pumice × PBNS interaction depended on curing age (p = 0.002): it was antagonistic at day 1 and positive but not significant after multiplicity adjustment at 28 days. The hybrid had the highest mean 28-day UCS (3.15 vs. 2.55 MPa for the control; difference not significant, n = 3). Pumice is thus a promising cement replacement, whereas the effect of PBNS in its presence is age-dependent.
No takes yet. Share an insight, caveat, or question.
Çalışkan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: