Answers are grounded in this paper and cite their sources.
Fluoroelastomer (FKM) is widely used in aerospace sealing but suffers from synergistic degradation caused by thermal oxidative aging, low temperature embrittlement, salt spray corrosion, and oil swelling. In this study, polytetrafluoroethylene (PTFE) and aluminum oxide (Al 2 O 3 ) hybrid nanofillers were incorporated into the FKM matrix and surface, and tailored microstructures were engineered to fabricate a FKM/PTFE/Al 2 O 3 composite. The composite exhibited excellent stability under harsh conditions: after exposure to 200°C and −20°C, and after immersion in 5 wt% NaCl solution and hydraulic oil, its hardness change remained within ±3%, outperforming pristine FKM. Tribological tests showed friction coefficient reductions of 61.3% at high temperature, 68.2% at low temperature, 62.5% after NaCl solution immersion and 80.5% after hydraulic oil immersion compared to aged FKM, along with significantly reduced wear depth. PTFE provides self‐lubrication that minimizes adhesion and friction, while well‐dispersed Al 2 O 3 nanoparticles act as physical barriers to inhibit medium penetration, reinforce the matrix, and suppress crack initiation and propagation. A multiscale mechanism involving structure guidance, material response, and interface self‐repair underpins these improvements, greatly enhancing FKM's anti‐aging and wear resistance in extreme environments and offering a promising route for high performance sealing materials.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: