Answers are grounded in this paper and cite their sources.
Indium (In) is a vital strategic metal mainly found in zinc metallurgy residues, especially in the fuming dust. However, the efficient extraction of In is challenging due to impurity interference (e.g. Al, Fe, etc.) and environmental restrictions. This study compares three acidic organophosphorus extractants – P204, P507, and Cyanex 272 – to selectively separate In(III) from a complex sulfate leachate. It is revealed that Cyanex 272 showed excellent selectivity to In(III), achieving a 98.4% extraction rate under optimized conditions (20% Cyanex 272, initial sulfuric acid concentration 0.1 mol L−1, 25°C, O:A = 1:1), while minimizing the co-extraction of Al and Fe. The effects of extractant concentration, initial sulfuric acid concentration, temperature, and phase ratio on In(III) extraction were also investigated. A stripping efficiency of 99% was obtained using 5 mol L−1 H2SO4, thereby avoiding chloride-induced corrosion and wastewater generation in the conventional extraction process. The FT-IR, and 31P-NMR analysis confirmed that In(III) was extracted via a cation-exchange mechanism, forming In A3-type complexes. More than 99.9% of indium can be extracted through a three‑stage counter-current extraction, and 99.9% of indium can be stripped via a three‑stage counter-current stripping. This work demonstrates that the Cyanex 272–H2SO4 system is a promising route for high-efficiency indium recovery from complex hydrometallurgical solutions, while avoiding the use of HCl in the stripping step and the associated generation of chloride-containing wastewater.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: