Answers are grounded in this paper and cite their sources.
Inspired by gecko adhesion, robotic end-effectors have gained increasing attention in aerospace engineering for applications such as spacecraft servicing, orbital debris removal, and payload transportation. However, microwedge adhesive setae in large-area or multi-unit adhesive systems often suffer from reduced performance due to insufficient contact on slightly inclined surfaces and the pitch-back moment generated during tangential actuation. To overcome these limitations, we propose a gecko-inspired end-effector incorporating an overlapping rigid-compliant-rigid (R-C-R) displacement/force transmission chain. The compliant adaptive layer enables effective accommodation of slight surface inclinations, while a micro-displacement rigid actuator applies low-force, low-torque loading to the microwedge adhesive pad with minimal coupling disturbance. Using an ε-constraint strategy and sequential quadratic programming (SQP) based on the analytical model, a balanced compatibility design is achieved. Experiments show that the optimized end-effector attains a 91.5% contact area and an adhesion force of 8.83 N on flat surfaces, adheres to a 320 g object with a 0.13° inclination, and maintains stable adhesion under ±600 mm/s² acceleration and velocities up to 50 mm/s over 120 repeated dynamic tests. In addition, dynamic capture validation on an air-bearing platform demonstrates the preliminary feasibility of the end-effector for low-friction free-floating target capture. This work provides a design and optimization strategy for gecko-inspired end-effectors and offers preliminary experimental support for their potential aerospace-oriented applications.
No takes yet. Share an insight, caveat, or question.
Song et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: