Answers are grounded in this paper and cite their sources.
An innovative prefabricated concrete elevator‐shaft system with a prestressing‐box hybrid connection was developed for old dwelling renovation to achieve rapid installation and reliable seismic performance. However, as the key connecting components in prefabricated constructions, the mechanical performance and mechanism of box connections have not been fully understood. In the present study, a series of monotonic and cyclic tensile tests, finite‐element simulations considering several design parameters, and component‐based theoretical modeling were conducted on the box connections. Results indicated that the anchor rod governed load transfer and energy dissipation through elastic–plastic deformation, whereas the box plates and longitudinal reinforcement provided auxiliary confinement and load sharing. Specimens with 20 mm anchor rods exhibited stable hysteresis loops and superior ductility, confirming their suitability for mechanical retrofitting applications. It was obtained that the bearing capacity and stiffness of box connections under cyclic uniaxial tension decreased significantly due to the Bauschinger effect and cyclic accumulative plastic damage. Parametric analyses revealed that anchor‐rod diameter, yield strength, and box‐plate thickness were the dominant factors affecting stiffness, strength, and energy dissipation, while rod length and wall‐bar diameter had negligible influence. A component‐based spring model was developed and the bilinear constitutive formulation was established, which accurately reproduced the load–displacement curves and provided the foundation for engineering design for box connection.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: