Answers are grounded in this paper and cite their sources.
Demint plant is a water supply unit that functions to keep water away from high mineral content and maintain hardness stability. This installation is very influential on the quality of internal water for water treatment, especially in oil palm processing plants. In providing the supply of water needs in the factory, the company must have a demint plant unit if the silica content contained in the reservoir water is in high condition then use the installation. The physical properties of water have various criteria, one of which is minerals, oxygen and magnesium in the form of hardness. The nature of water hardness is divided into two types, namely permanent hardness and temporary hardness. Water that has high hardness is very detrimental. The objectives of this study are: (1) Analyze the results of the demineralization process in palm oil mill water treatment to remove Ca and Mg levels. (2) Calculate and measure Ca and Mg levels in trace water quality. (3) Analysis of demin plant quality performance in reducing hardness. From the analysis of hardness levels in the quality of the demint plant unit using the principles of quantitative methods, the following conclusions can be drawn: (1) The demineralization process to remove Ca and Mg or hardness is still not effective due to the factor of using expired quality resin so that ion exchange is not efficient. (2) Ca and Mg levels in trace water quality are not read or undetectable by the test equipment. (3) The performance of the demin plant to remove hardness is not efficient due to the unstable silica content and resulting high minerals so that the performance of the demin plant is required to be maximized. (4) In the demint plant test, the output results of cation pH 5, M.Alk 19.2 ppm, Hardness trace, silica 4.6 ppm, TDS 36 ppm, Iron 0.18 ppm and when compared to the standard, namely pH 7-9, M.Alk 35 ppm, Hardness trace, silica 5 ppm, TDS <100 ppm, Iron 0.2 ppm there are several quality parameters that still do not meet the planned standards so that evaluation needs to be done in order to achieve quality standard parameters.
No takes yet. Share an insight, caveat, or question.
Prajutama et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: