Answers are grounded in this paper and cite their sources.
The heat transfer enhancement and pressure loss characteristics of a tube fitted with two novel gear-shaped turbulators, namely the gear ring inner (GRI) and gear ring outer, were experimentally and numerically investigated. This study addresses a research gap by systematically evaluating the effects of gear geometry on thermal performance over a wide range of turbulent flow conditions (Re = 6000–20,000). The investigated parameters included three numbers of teeth (N = 4, 6, and 8) and three pitch ratios (PR = 2, 3, and 4). The results demonstrate that the insertion of gear-ring turbulators substantially intensifies fluid mixing and disrupts both the thermal and hydrodynamic boundary layers compared to a smooth tube, thereby enhancing convective heat transfer. Depending on the gear configuration, tooth number, and pitch ratio, the Nusselt number increases by 1.82–2.67 times relative to the smooth tube. This enhancement, however, is accompanied by an increase in pressure loss, with the friction factor rising by 8.37–12.53 times. Among the investigated configurations, the GRI insert with N = 8 and PR = 2 at Re = 6000 achieves the highest thermal performance factor of 1.16.
No takes yet. Share an insight, caveat, or question.
Samruaisin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: