Answers are grounded in this paper and cite their sources.
Background This study evaluates the effectiveness of 1-methylnaphthalene (1-MN) as a performance enhancer for diethylamine (DEA)-based corrosion inhibition in oil production header systems under actual operating conditions. The field assessment compared 30 ppm DEA alone with DEA supplemented with 1-MN at concentrations of 2–5%. Results Corrosion coupons, online corrosion monitoring, fluid analysis, and X-ray diffraction (XRD) were used to evaluate corrosion performance and characterize corrosion products. Following the addition of 1-MN, the corrosion rate decreased from 25 to 14 mpy at the HP Wet Separator #01 inlet, from 9 to 2 mpy at the LP Wet Separator #03 outlet, and from 4 to less than 1 mpy at the LP Dry Separator #04 outlet. Fluid analysis also indicated lower total iron concentrations and higher corrosion inhibitor residuals. XRD analysis showed an increase in relative magnetite (Fe₃O₄) content from 50.1% to 53.9%, a decrease in troilite (FeS) from 26.1% to 18.2%, and the disappearance of goethite, which had previously been detected at 1.8%. Conclusions The findings indicate that incorporating 1-MN into an existing DEA-based corrosion inhibition program can improve corrosion control under actual oilfield operating conditions. This approach enhance inhibition performance and offer potential reductions in chemical consumption and operating costs.
No takes yet. Share an insight, caveat, or question.
ABDELNASER et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: