Answers are grounded in this paper and cite their sources.
The dynamic performance of droop-controlled single-phase voltage-source inverters (VSIs) strongly depends on the accurate and fast calculation of active (P) and reactive (Q) powers under nonlinear load (NLL) conditions. Existing PQ calculation methods have been developed independently, most using a second-order generalized integrator (SOGI) approach, masking their structural relationships. This paper introduces a unified framework that interprets these PQ calculation approaches as combinations of input filters, intermediate notch filters, and output low-pass filters, enabling a clear spectral-domain analysis. Using this framework, the paper reveals that the current-side orthogonal filter in the fastest previously reported method (PQ4) causes a reactive power undershoot during load transients due to insufficient filtering. To overcome this limitation, a novel scheme (PQ2m) relocates the orthogonal filter to the voltage side and adds current-side SOGI filtering for improved distortion rejection. Analytical dynamic modeling enables a systematic design procedure, achieving an overshoot-free, dominant second-order response. Furthermore, incorporating notch filters (NFs) yields the PQ2mn variant and alternative PQ2mnb and PQ2mnc designs, which significantly suppress the output ripple while further accelerating the response speed. Hardware-in-the-Loop (HIL) results confirm settling-time reductions of up to 92.9% (PQ2m/PQ2mn), 95.75% (PQ2mnb), and 96.9% (PQ2mnc) compared to the conventional PQ1 method. Among all configurations, PQ2mn provides the best overall trade-off between dynamic enhancement and computational complexity.
No takes yet. Share an insight, caveat, or question.
Branco et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: