Answers are grounded in this paper and cite their sources.
Thermal-induced degradation of modulation transfer function (MTF) and image sharpness in automotive camera modules under large real-world temperature variations is a key bottleneck for the safe deployment of level 3 and higher advanced driver assistance systems. To address this challenge, a collaborative passive compensation framework is proposed to maintain high-resolution imaging performance across extreme temperature conditions. Within this framework, an elastic spacer is embedded into the lens stack as an additional optical design degree of freedom. This carefully engineered element expands the thermal focus compensation capability of the lens assembly and suppresses inherent back focal plane (BFP) drift within a narrow range through coordinated opto-mechanical coupling optimal design. Then, a metal stiffener plate is introduced to tailor the thermo-mechanical deformation behavior of the detector-mounted printed circuit board. By optimizing the thickness of the stiffener plate, the residual thermally induced BFP drift of the overall opto-mechanical system is effectively counteracted, enabling global opto-mechanical–thermal equilibrium. Experimental results from the prototype camera module demonstrate that, over an ultra-wide temperature range from −40 °C to +95 °C, the maximum absolute BFP mismatch between the lens optical focus plane and the image sensor plane is constrained within 1m, achieving ∼90% reduction compared with conventional optical-only athermalization approaches. At a spatial frequency of 119 lp/mm, the MTF at the center and the left/right 0.7-field positions consistently exceeds the design threshold of 0.5 with negligible degradation throughout the full temperature range. These results demonstrate that the proposed approach enables a fully passive, temperature-invariant automotive camera module, achieving an optimal balance among compactness, cost efficiency, and robustness under harsh automotive operating conditions.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: