Answers are grounded in this paper and cite their sources.
Thermo-catalytic pyrolysis coupled with CO 2 reforming offers a sustainable route for the simultaneous valorization of waste plastics and greenhouse gases. Herein, waste polypropylene (WPP) was pyrolyzed over HZSM-5, HBeta, and HY zeolite catalysts. The resulting gases were separated from pyrolysis oils and subsequently reformed with CO 2 over Ni and Ni-Co-based catalysts. The zeolite framework topology significantly influenced the pyrolysis product distribution. In contrast to HBeta and HY—which generated aliphatic-rich pyrolysis oils with minor aromatic content and mixed olefin-paraffin gas streams—HZSM-5 selectively favored the formation of BTEX-dominant pyrolysis oil with lower aliphatic content, alongside a paraffin-rich pyrolysis gas. During CO 2 reforming, variations in the initial composition of the pyrolysis gas feed mixtures— produced using different zeolite catalysts—did not significantly alter the resulting syngas yields or H 2 /CO ratios. Furthermore, the reforming catalyst 10Ni-MgAl 2 O 4 exhibited similar coking behavior across all three feed compositions. Partial substitution of Ni with Co, particularly in 9.5Ni-0.5Co-MgAl 2 O 4 enhanced reactant conversion, suppressed coke deposition, and increased syngas production. These findings demonstrate that combining tailored pyrolysis with an optimized bimetallic (Ni Co) catalyst system effectively advances the simultaneous valorization of plastic waste and CO 2 .
No takes yet. Share an insight, caveat, or question.
Das et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: