Answers are grounded in this paper and cite their sources.
In this study, the effect of elemental-ratio variation on mechanical properties and the electrochemical behaviour of self-supporting Ni–Fe–Mn–Cr high-entropy alloys (HEAs) was systematically investigated. Four non-equiatomic HEAs were synthesized by mechanical alloying, in which the content of one constituent element was selectively doubled. The resulting alloys exhibited composition-dependent phase constitution, with the CrMnFeNi 2 and CrMnFe 2 Ni HEAs forming single face-centred cubic (FCC) phase, whereas the CrMn 2 FeNi and Cr 2 MnFeNi HEAs exhibited FCC + body-centred cubic (BCC) structures. The Cr 2 MnFeNi HEA showed the highest micro-hardness (198.4 ± 4 HV) and compressive yield stress (1757.71 ± 13.4 MPa). In alkaline oxygen evolution reaction (OER), the CrMnFe 2 Ni HEA exhibited the lowest overpotential of 339 ± 1 mV at 10 mA cm −2 and the best 10 h stability, whereas the CrMnFeNi 2 HEA showed the lowest Tafel slope (110.8 ± 0.3 mV dec −1 ), the highest double-layer capacitance, and the lowest charge transfer resistance. The non-identical trends observed among the investigated HEAs demonstrate that elemental-ratio tuning influences their mechanical properties, electrochemical surface characteristics, and OER kinetics in a composition-dependent manner. Collectively, these findings highlight compositional tuning as a promising strategy for tailoring the combination of mechanical strength and OER performance in self-supporting bulk HEA electrodes.
No takes yet. Share an insight, caveat, or question.
Fan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: