Answers are grounded in this paper and cite their sources.
Due to their excellent mechanical properties, composite laminates have been widely used in aerospace and other engineering fields. However, composite laminates are inevitably subjected to various impacts during manufacturing and service, resulting in damage such as delamination and fiber breakage, which significantly reduces residual mechanical performance. In this paper, single and repeated impact tests, followed by compression-after-impact (CAI) tests, were performed to investigate the correlation between single-impact energy and the number of repeated impacts under equivalent damage levels. Firstly, single-impact tests were conducted at three energy levels: 65, 75, and 85 J, and the evolution of contact force, dent depth, and absorbed energy during impact was analyzed. Non-destructive testing (NDT) revealed a significant increase in absorbed energy with increasing impact energy. Subsequently, repeated impact tests were performed at 44 J with 5, 10, 15, and 20 impacts, and damage evolution was systematically examined. Finally, CAI tests were conducted to further assess the effect of impact damage on the residual strength of laminates. A comparison between repeated low-energy impacts and single high-energy impacts showed that the cumulative effects of low-energy impacts could be equivalent to those of high-energy impacts in terms of dent depth and ultimate compressive load.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: