Answers are grounded in this paper and cite their sources.
Ski waxing can generate airborne particulate matter (PM) and volatile organic compounds (VOCs), yet stage-specific and time-resolved data for modern wax products remain limited. This two-phase pilot study combined an exploratory survey of ski industry workers with a field-simulated assessment of PM and VOC concentrations during ski waxing and tuning. Among 50 survey respondents, 69.2% of those with known wax type reported current use of fluorocarbon-containing wax, and only 8% reported access to an effective dedicated exhaust system. A low-cost optical PM sensor and a PID were used to measure PM2.5, PM10, and total VOC responses. Three block wax types and four waxing stages were evaluated. Because each product was tested only at its manufacturer-recommended ironing temperature, wax type and temperature could not be separated. PM concentrations varied by stage and tested wax-temperature condition. Application produced the highest PM2.5 and PM10 concentrations, with run-level means of approximately 456 to 771 µg/m³ and 602 to 1,045 µg/m³, respectively. Brushing and scraping generated intermediate concentrations, while ironing produced elevated PM only for the fluorinated race wax. VOC patterns differed from PM, while ironing produced elevated PM only under the Wax 3–160 °C condition. Tuning generated much lower PM concentrations than waxing. These findings provide stage-resolved, time-resolved near-field concentration data to inform future personal exposure assessment and evaluation of control strategies in ski service environments.
No takes yet. Share an insight, caveat, or question.
Fang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: