Answers are grounded in this paper and cite their sources.
Biomedical implants with scaffold structures are required to ensure osseointegration and mechanical stability. The aim of this study was to design and analyse selected mechanical and microstructural properties of 3D scaffold structures made of Ti-6Al-4 V titanium alloy for biomedical applications. Three different unit cells with various topologies were considered. The designed unit cells were used to create 3D scaffold structures using a Powder Bed Fusion – Laser Beam/Metal process. The obtained computer topography scans allow for a comparison of the deviations of the 3D printed structures with the intended geometry. The morphology of the obtained structures was analysed via scanning electron microscopy, their chemical composition was explored using energy dispersive X-ray spectroscopy, their mechanical strength was obtained via compression testing, and their corrosion resistance was investigated using the potentiodynamic polarisation method. The strength of the scaffold structure was found to be greater when the printing direction coincided with the loading direction during compression testing. A structure composed of spherical hollow cubic unit cells demonstrated the highest compressive strength. A scanning electron microscopy analysis revealed relationships between the topology of the structures, the excess material and unbound Ti-6Al-4 V particles present in the selective laser melted structure. The scaffold structures were characterised by greater corrosive activity and greater susceptibility to corrosive processes compared to the solid Ti-6Al-4 V sample.
No takes yet. Share an insight, caveat, or question.
Żaba et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: