Answers are grounded in this paper and cite their sources.
Infill patterns for load-bearing printed parts are often chosen with little evidence, and a homogenised finite-element model calibrated from the slicer toolpath is the natural screening tool. We measured where such a model stops being reliable, using a topology-optimised Messerschmitt–Bölkow–Blohm beam with cubic, gyroid and honeycomb infill at two densities. The reference is a road-resolved model of every deposited toolpath; no beam was tested mechanically. Three limits appear. First, inputs: skipping arc moves without updating the position inflates the gyroid orientation input in all four slicers tested, and the nominal density setting hides almost all of the pattern difference. Second, the core law: a scalar density law falls 8 to 20% below the reference and loses the difference between cubic and gyroid, while a homogenised tensor removes this error. Third, resolution: with a tensor core and dense material of the correct thickness, stiffness agrees with the reference within 5 to 7%, yet cubic and honeycomb cannot be separated. Omitting the solid layers about halves the stiffness. Weaker bonding between layers keeps the pattern order. These results apply to one beam and to linear elasticity. The data and code are openly available.
No takes yet. Share an insight, caveat, or question.
Alymani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: