Answers are grounded in this paper and cite their sources.
This study analyzes how remixing in a Material Transfer Vehicle (MTV) reduces thermal segregation of hot mix asphalt (HMA): after remixing, colder agglomerates surrounded by hotter HMA equalize by heat conduction. Transient conduction in cubic agglomerates of 2, 3, and 4 cm was modeled with a finite-conductivity model and a lumped-capacitance-type model, both at a Biot number of 0.5. The calculation was verified by oven-heating tests on two 4 cm cubic AC 8 S 50/70 specimens at the same Biot number: the finite-conductivity model reproduced the measured center temperature with a root-mean-square error of 2.0 °C, whereas the lumped model overpredicted it by 12.8 °C. The time to eliminate 90% of the initial temperature difference is 12, 28, and 50 min for 2, 3, and 4 cm agglomerates; a three-dimensional numerical analysis shows that perfect contact shortens these times by 1.5–2 times and that a cold-material fraction of 9–16% reduces the local temperature difference after 10–20 min by a further 10–50%. Equalization of 2 cm agglomerates within about 10 min is comparable with the estimated 5–20 min residence time in an MTV, whereas 4 cm agglomerates retain about 40% of it after 20 min. These conditional model results require field verification.
No takes yet. Share an insight, caveat, or question.
Mieczkowski et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: