Answers are grounded in this paper and cite their sources.
To investigate outlet distortion and vortex-system coupling associated with forebody vortex ingestion in an unmanned aerial vehicle (UAV) top-mounted twin S-shaped inlet, three-dimensional steady Reynolds-averaged Navier–Stokes simulations were performed at H = 20 km and Ma∞ = 0.6. In the baseline inlet without the forebody, counter-rotating corner vortices form near the lower wall and developed into a four-vortex pattern under Dean-type secondary flow, producing distinct low-total-pressure regions at the aerodynamic interface plane (AIP). With the forebody included, the dominant forebody vortex was reorganized near the inlet entrance, and the resulting structures entered the duct and interact with the lower-wall vortex system, increasing outlet-flow asymmetry. Compared with the baseline case, the AIP total-pressure recovery coefficient decreased from 0.969 to 0.947, the circumferential total-pressure distortion index DC60 increased from 0.156 to 0.382, and the swirl intensity (SI) increased from 2.74° to 3.09°.
No takes yet. Share an insight, caveat, or question.
Zhe-min et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: