Answers are grounded in this paper and cite their sources.
Fenestration is a primary pathway for solar heat gain in buildings. Polymer-dispersed liquid crystal (PDLC) films can be switched between a translucent scattering state and a transparent clear state under an applied electric field. They represent a promising strategy for dynamic solar control in buildings, i.e., as smart windows. Apart from material usage and manufacturing cost considerations, PDLC film thickness can also affect the solar radiation performance of PDLC smart windows. Integrating sphere measurements and solar radiation glazing factor calculations on selected commercial PDLC films, 0.487 mm and 0.549 mm thick, revealed that the thicker film was associated with an 8.2 percentage-point lower solar transmittance ( T sol , 59.6% against 67.8%) in the translucent state, compared to a 3.0 percentage-point difference (77.1% against 80.1%) in the transparent state. Of the translucent-state difference, 3.2 percentage points were additional reflectance and 5.0 percentage points were additional absorptance. The concentration of the difference in the translucent state indicates that it involves the scattering active layer. Ultraviolet (UV) transmittance remained below 1.7%, and the colour rendering factor (CRF) was at least 0.948 in all configurations, regardless of PDLC film thickness or switching state.
No takes yet. Share an insight, caveat, or question.
Melkert et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: