Answers are grounded in this paper and cite their sources.
Produced water is often used for pressure maintenance and secondary recovery in reservoirs. However, the successful injection of produced water depends on its quality, which is related to the presence of organic and inorganic solids. In this study, four nanotechnology-based treatments were evaluated to restore and/or prevent formation damage associated with a decline in injectivity during the water-injection process. The evaluation was carried out from laboratory assessment to field trial application, including life cycle assessment (LCA). The experimental evaluation included water quality tests for remediation and damage inhibition scenarios, as well as zeta potential, interfacial tension, and organic dissolution testing. Water and solids were characterized using standard analytical methods and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Additionally, reservoir simulation analyses were performed to identify pressure injection profiles under different remediation and inhibition scenarios (0%, 50%, and 100% effectiveness). The environmental impacts of each scenario were assessed by LCA. The experimental results indicated that nanofluids were effective in restoring injectivity by more than 80% with low dosages of nanotreatments ranging from 60 mg·L–1 to 200 mg·L–1. This improvement was mainly attributed to their ability to alter the surface charge of solids and dissolve organic compounds in solution. The first field trial showed a reduction in wellhead pressure after nanofluid injection, consistent with the reservoir simulation. The environmental impact evaluation based on LCA, which considered human resources, ecosystem quality, resource usage, and carbon footprint, showed the best environmental performance for the inclusion of nanotreatments in both remediation and inhibition phases, with a reduction in kgCO2eq emitted per water stored of up to 27% compared with the scenario without the inclusion of nanotreatments. The incorporation of nanotreatment for cake removal or cake formation inhibition can significantly alter the injection pressure profiles, thereby reducing energy demand and environmental impacts.
No takes yet. Share an insight, caveat, or question.
Giraldo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: