Answers are grounded in this paper and cite their sources.
Geotextiles used as filtration components in engineering structures are particularly susceptible to physical clogging due to the accumulation of fine soil particles within their pores. This process reduces cross-plane permeability and may negatively affect drainage system performance. This study aims to develop a laboratory methodology for artificial geotextile clogging and to assess the relationship between material characteristics and the degree of clogging, with particular emphasis on the potential of SEM and CT image analysis. Laboratory tests were conducted on two needle-punched nonwoven polypropylene geotextiles using an original experimental methodology developed by the authors to simulate clogging under water flow through a soil medium. Material properties and microstructure were analyzed before and after filtration tests, including high-resolution SEM and CT imaging to characterize soil particle retention within the geotextile structure. The results showed that, following the clogging process, the water permeability coefficient decreased by approximately 79–92%, while the clogging ratio reached 1.2 and 1.6 for the investigated geotextiles. The thinner geotextile exhibited greater mass increase and higher susceptibility to clogging despite its higher initial permeability. SEM and CT imaging enabled the qualitative identification and visualization of clogging-related features within the geotextile structure. It confirmed the suitability of these techniques for future quantitative characterization of nonwoven geotextile clogging.
No takes yet. Share an insight, caveat, or question.
Markiewicz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: